ARM Technology Training Course

Buildroot is an open-source project that contains scripts that produce a cross-compilation toolchain, a customizable root filesystem image, and a Linux kernel for embedded devices. During this practical course, participants will learn how to use it:

• How to select software that goes into the root filesystem.
• How to add new packages and modify existing ones.
• How to add support for new embedded boards.

During the course, bootable filesystem images will be produced. Remote courses are delivered using the QEMU emulator, while in the classroom it is possible to use either QEMU or real embedded boards of the trainer's choice.

Other projects with similar goals include the Yocto project and OpenWRT. Please use these presentations to determine which one is the right choice for your needs.

The LEDE Project (Linux Embedded Development Environment) is a Linux operating system based on OpenWrt. It is a complete replacement for the vendor-supplied firmware of a wide range of wireless routers and non-network devices.

In this instructor-led, live training, participants will learn how to set up a LEDE based wireless router.

Audience

• Network administrators and technicians

Format of the course

• Part lecture, part discussion, exercises and heavy hands-on practice

Shadowsocks is an open-source, secure socks5 proxy.

In this instructor-led, live training, participants will learn how to secure an internet connection through a Shadowsocks proxy.

By the end of this training, participants will be able to:

• Install and configure Shadowsocks on any of a number of supported platforms, including Windows, Linux, Mac, Android, iOS, and OpenWrt.
• Deploy Shadosocks with package manager systems, such as pip, aur, freshports and others.
• Run Shadowsocks on mobile devices and wireless networks.
• Understand how Shadowsocks encrypts messages and ensures integrity and authenticity.
• Optimize a Shadowsocks server

Audience

• Network engineers
• System Administrators
• Computer technicians

Format of the course

• Part lecture, part discussion, exercises and heavy hands-on practice

In this instructor-led, live training in Peru, participants will learn how to create a build system for embedded Linux based on Yocto Project.

By the end of this training, participants will be able to:

• Understand the fundamental concepts behind a Yocto Project build system, including recipes, metadata, and layers.
• Build a Linux image and run it under emulation.
• Save time and energy building embedded Linux systems.

Description

This four day training combines theory with hands-on exercises in order to introduce the Yocto Project.
It answers frequently asked questions like:

• Is it really necessary to use another version of the toolchain/libraries/packages for each and every GNU/Linux project and an top of that to follow a different work-flow?
• Can you ensure that the development environment is identical for all developers/suppliers and that you can still produce identical builds like today in 10+ years from now?
• Can the YP help find out under what software licenses the packages you use are licensed?

Hands-on sessions are performed on target hardware (e.g. Beagle Bone Black Rev. C - http://beagleboard.org/BLACK). After the training you will be able to download a docker image with Ubuntu 14.x and all dependencies pre-installed plus the examples in order to work with the course material in your own labs. Please note that this is not an introductory course to Embedded GNU/Linux. You should already know how Embedded GNU/Linux works and how to configure/build the GNU/Linux kernel and kernel drivers.

Who should attend?

You already use GNU/Linux for your projects and have probably heard about the Yocto Project, but did not dare to have a closer look into it, or had difficulties using it. You don’t know whether and how your daily work-flow can be accommodated in the YP and generally find the YP rather complicated. Why do we need all this since up to know everything was (supposedly) much easier? After the training you should be able to decide whether you need the YP or not. The workshop is aimed at software-, development-, system engineers, testers, administrators, engineers and other parties interested in the YP, with a solid knowledge of Embedded GNU/Linux.

This instructor-led, live training in Peru (online or onsite) is aimed at engineers and computer scientists who wish to apply the fundamentals of circuits and electronics to design devices and systems that utilize properties of electrical components for the development of hardware functionalities.

By the end of this training, participants will be able to:

• Set-up and configure the necessary tools and programs for circuits and circuit board development.
• Understand the basic principles behind circuits and electronics engineering.
• Utilize the primary electronic components in constructing efficient computer hardware technologies.
• Optimize electronic devices by implementing circuit analysis methods.
• Apply the fundamentals of electronics and circuits to the development of enterprise applications.

This instructor-led, live training in Peru (online or onsite) is aimed at engineers and scientists who wish to learn and apply DSP implementations to efficiently handle different signal types and gain better control over multi-channel electronic systems.

By the end of this training, participants will be able to:

• Setup and configure the necessary software platform and tools for Digital Signal Processing.
• Understand the concepts and principles that are foundational to DSP and its applications.
• Familiarize themselves with DSP components and employ them in electronics systems.
• Generate algorithms and operational functions using the results from DSP.
• Utilize the basic features of DSP software platforms and design signal filters.
• Synthesize DSP simulations and implement various types of filters for DSP.

This instructor-led, live training in Peru (online or onsite) is aimed at FPGA developers who wish to use Vivado to design, debug, and implement hardware solutions.

By the end of this training, participants will be able to:

• Develop HDL systems with C code and Vivado tools.
• Generate and implement soft processors in Vivado.
• Test and simulate C code using Vivado.

In this instructor-led, live training in Peru, participants will learn how to code using FreeRTOS as they step through the development of a simple RTOS project using a microcontroller.

By the end of this training, participants will be able to:

• Understand the basic concepts of real-time operating systems.
• Learn the environment of FreeRTOS.
• Learn how to code with FreeRTOS.
• Interface a FreeRTOS application to hardware peripherals.

This instructor-led, live training in Peru (online or onsite) is aimed at engineers who wish to learn how to use embedded C to program various types of microcontrollers based on different processor architectures (8051, ARM CORTEX M-3, and ARM9).

A two day course covering all design principles with code examples coupled with recent industrial technology; very useful for automotive software developers

This instructor-led, live training (online or onsite) is aimed at C developers wishing to learn embedded C design principles.

By the end of this training, participants will be able to:

• Understand the design considerations that make embedded C programs reliable
• Define the functionality of an embedded system
• Define the program logic and structure to obtain the desired result
• Design a reliable, error-free embedded application
• Obtain optimal performance from target hardware

Format of the Course:

• Interactive lecture and discussion
• Exercises and practice
• Hands-on implementation in a live-lab environment

Course Customization Options:

• To request a customized training for this course, please contact us to arrange.

In this instructor-led, live training in Peru, participants will learn how to program the Arduino for real-world usage, such as to control lights, motors and motion detection sensors. This course assumes the use of real hardware components in a live lab environment (not software-simulated hardware). 

By the end of this training, participants will be able to:

• Program Arduino to control lights, motors, and other devices.
• Understand Arduino's architecture, including inputs and connectors for add-on devices.
• Add third-party components such as LCDs, accelerometers, gyroscopes, and GPS trackers to extend Arduino's functionality.
• Understand the various options in programming languages, from C to drag-and-drop languages.
• Test, debug, and deploy the Arduino to solve real world problems.

This instructor-led, live training in Peru (online or onsite) is aimed at engineers who wish to learn the design principles of microcontroller design.